Part No. 009 consists of two inserts and three cap head screws to solidly mount the 178mm dust shroud to a Makita 178mm polisher.

Extended hybrid skirt for 178mm dustshroud to extend the life of the skirt and to accommodate larger diamond segment grinding wheels

Orange Turbo Soft Bond Wheel is our best value surface preparation wheel for medium/hard concrete.

It represents exceptional value, excellent performance and longevity with high productivity.

Read more below.

Save $50 +gst while stocks last – High quality, overstocked

125mm Coatings removal PCD wheels are designed for aggressive removal of thick overlays and coatings. They are fast, long lasting and economical.

See below for more information

These universal fitting, grinding polishing corner tools fit most oscillating multi tools (except Fein or new Starlock fitting system) to perfectly finish small corners or difficult to reach areas.

We will not be restocking these products due to the new Starlock system introduced.

Read more and view the video below…

Save $55 on 30/40 grit 178mm wheels while stocks last

The best glue/mastic removal tool you will ever use and excellent dust control on soft concrete – Tearitoff low scratch glue removal wheel easily handles glue and soft coatings without smearing and without the scratches of a heavy grit wheel. Hard bond, aggressive design suitable for medium hardness concrete. Read more below..

The Situp Grinder Bundle is a very effective concrete grinder.

It will enable faster grinding with less effort on concrete floors and edges compared to kneeling to hand grind.

It is perfect for surface preparation, glue, coatings and leveling slabs.

See Extreme Grinding where it is working to its maximum.

More details below.

The Situp Polisher Attachment kit fits a 180mm variable speed Hitachi or Makita 180mm polisher.

It will produce flatter floors and edges faster with less effort than kneeling, it is perfect for removing tool marks, polishing edges and machine-grouting to fill the minor holes.

More details below.

The Situp Grinder attachment kit fits to a 230mm angle grinder to transform a hand grinder into a concrete grinder.

It will enable faster grinding with less effort on concrete floors and edges compared to kneeling to hand grind.

It is perfect for surface preparation, removing glue, coatings and leveling slabs.

See Extreme Grinding where it is working to its maximum.

More details below.

Dust shroud 178mm (7in) with fittings for most 230mm (9in) angle grinders, steel fabrication with floating skirt.

Download a Q&A pdf

Read more below.

New replacement 178mm floating Hybrid skirt fits all Concrete Grinder dust shrouds with hook bonded around the perimeter.

This hybrid skirt floats to eliminate adjustment, always touches the floor for good dust control and never causes noticeable friction.

Read more below.

This alternative style 178mm rubber skirt which comes in two heights never causes noticeable friction when adjusted with a small gap at the bottom. Choose original 40mm height part no. 002RV40 or for large segment wheels choose part no. 00RV55  55mm height skirt.

Read more below

Dust shroud  for corners for 125mm wheels will fit most 125mm angle grinders and 180mm polishers, steel fabrication with hybrid floating skirt.

Download a Q&A pdf.

Read more below.

New replacement 125mm floating Hybrid skirt fits all Concrete Grinder dust shrouds with hook bonded around the perimeter.
This hybrid skirt floats to eliminate adjustment, always touches the floor for good dust control and never causes noticeable friction.
Read more below.

This alternative style hook and loop replacement 125mm rubber skirt does not cause noticeable friction when adjusted with a small gap at the bottom. Available in original Part No. 021RV30 and extended height Part No. 021RV45.

Read more below

Set of polisher inserts for 178mm dust shroud to fit Hitachi and Makita variable speed polishers.

More detail below.